strength of concrete by using marble powder as partial replacement. EXPERIMENTAL STUDY An experimental study was planned to check the variation in strength of concrete by replacing cement with marble powder and fly ash as an additive. The first step in the experiment was to find the initial values of all the materials used.
the percentage of marble dust powder for up to 10 partial replacement of cement with marble dust powder. With further increase in the percentage of marble dust powder the split tensile strength of concrete decreases.
properties of concrete produced waste marble were examined. The project describes the feasibility of using marble dust with partial replacement of cement. Various cubes were casted by using marble dust with partial replacement of cement, MDP used as a Admixture in Conventional concrete and recron fibre in conventional concrete with MDP in
This study aims to evaluate concrete having Waste Marble Powder WMP as partial replacement of cement. Marble is the metamorphic form of limestone CaCO 3 and WMP was chosen as substitute of cement on account of its high calcium oxide content. WMP is by-product of marble industry and is an environmental burden.
an overview of research work carried out by various researchers in the field of marble dust and replacement of cement. B. Study on concrete properties using marble dust as partial replacement cement and also other aggregates. Valeria Corinaldesi et al.2005,has studied the characteristics of marble powder and found that marble powder showed a
strength of concrete with partial replacement of cement with marble powder Keywords Cement production Marble dust, calcinating limestone 1. Introduction Cement is the key ingredient in concrete products and it is considered as one of the most important
marble powder as partial replacement in cement con-crete. They used 10 marble powder as replacement for cement and reported that increase in marble powder would signi cantly decrease the workability of concrete. Replacement of cement and sand with marble powder at 10 has been found to improve the mechanical and durability characteristics of ...
concrete while replacing the Marble Dust Powder with Different proportions in concrete. Osman Simsek et al. 3 mates investigated that the sulphate resistance of cement mortars when subjected to different exposure conditions. They added that cement mortars were prepared using ground waste brick GWB as a Pozzolanic partial replacement
From the above Graph is seen that the Flexure strength in M 25 and M30 grade of concrete at 28 days increase up to 10 replacement of Marble Dust Powder and After that aove 10 MDP it decrease ...
Nov 12, 2012 pdf replacement of sand with marble powder in green concrete . The use of waste marble powder dust was proposed in partial replacement replacement of cement with marble powder pdf. Production of Selfcompacting Concrete . More detailed.
International Journal of Engineering Trends and Applications IJETA Volume 5 Issue 3, May-Jun 2018 ISSN 2393-9516 www.ijetajournal.org Page 57 Partial Replacement of Fine Aggregates with Quarry Dust and Marble Powder in Concrete
Indian Journal of Engineering, Study on marble dust as partial replacement of cement in concrete, VOL.4, NUMBER 9, JULY 2013 Baboo Rai, Khan Naushad H, Abhishek Kr, Tabin Rushad S, Duggal S.K, Influence of Marble powdergranules in Concrete mix, International Journal of Civil and Structural Engineering Volume 1, No 4, 2011.
Due to urbanization, the usage of cement in the construction industry gets increased rapidly. Due to the increasing demand for cement, marble powder is used as a partial replacement of cement for economic status. Marble waste is a solid waste material generated from the marble processing and can be used as a filler material in cement while preparing concrete.
used to wash out this marble powder with water in natural streams which cause water pollution and is harmful for our environment. So, it is advisory to use marble dust as partial replacement with cement as it has properties similar to cement and one of good pozzolanas. Similarly use of MK leads to Green
AN EXPERIMENTAL INVESTIGATION ON PARTIAL REPLACEMENT OF CEMENT WITH MARBLE POWDER J.B.S.BHARATHI1, B.RAMYA2 and K.SANTHOSH3 1,2,3 Asst.Professor,Dept.Of Civil Engg., DADI INSTITUTE OF ENGINEERING AND TECHNOLOGY, Anakapalle. Abstract-The project presents the study of concrete mix design using marble powder. The disposal of
Partial replacement of cement with marble dust powder for making of cement concrete with 0.40 water cement ratio. Compressive strength, split tensile strength and flexural strength of concrete are tested at 1, 28 and 90 days. Test result shows that the strength increases up to 15 replacement of cement then strength decreases.
describes the feasibility of using the marble sludge dust in concrete production as partial replacement of cement The compressive Strength of concrete was measured for 7 and 28 days.Super-plasticizers are the materials which delivers very high workability with
concrete. The influence of using marble powder on the behavior of reinforced concrete slabs is also investigated. The main variable taken into consideration is the percentage of marble powder as partial replacement of cement content in concrete mixes. The experimental results showed that, using
Partial replacement of cement and usual fine aggregates by varying percentage of marble powder and marble granules reveals that increased waste marble powder WMP or waste marble granule WMG ...
Sep 04, 2020 Nitisha Sharma and Swami Dyal, 2015. Use of Marble Powder as Partial Replacement in Cement Sand Mix. International Journal of Engineering Science and Research Technology, vol. 4, Issue 05, PP 501-504. 14 Nutan C. and Jayeshkuma P., 2013. A Technical Study on Quarrying and Processing of Marble and Its Waste Incorporating With Concrete.
Project on Partial Replacement of Cement with Marble Powder. Advance concrete technology can reduce the consumption of natural resources and energy sources thereby lessen the burden of pollutants on environment. We describes the feasibility of using the marble sludge dust in concrete production as partial replacement of cement.
May 18, 2015 The main objective of this study is to develop useful concrete mixes using waste marble powder as partial replacement of cement and sand. Keywords Waste marble powder, concrete, compressive strength, flexure strength, split-tensile strength, workability, durability. Marble is obtained from the transformation of pure limestone. The purity of ...
Inuence of limestone waste as partial replacement material for sand and marble powder in concrete properties Omar M. Omar a, Ghada D. Abd Elhameed b,, Mohamed A. Sherif a, Hassan A. Mohamadien c a Department of Civil Construction and Architecture, Faculty of Industrial Education, Suez, Egypt b Building Materials Research and Quality Control Institute, Housing and Building National Research ...
characteristics of concrete using as a partial replacement of cement by marble dust powder and sand by stone dust. The Dissertation work is carried out with M 30 grade concrete for which the marble powder is replaced by 0, 5, 10, 15, 20 by weight of cement. For all the mixes compressive,
ash GSA as a partial replacement for cement shows that the compressive strength ranges from 4.50Nmm2 to 0.26Nmm2. The optimium replacement level by Mahmoud et al 2012 was achieved at 20 with a corresponding strength of 3.58Nmm2. This also caused decreases in strength with increase of cement above 20 replacement.
influence of partial replacement of cement with marble powder and silica fume to compare it with the compressive strength of ordinary M30 concrete. Replacement and addition ratio of both marble powder and silica fume with cement content separately at 0, 10, 20, and 30 by weight were investigated. The mechanical properties of
c Partial replacement of fine aggregate with marble powder in a concrete mix boosts the compressive strength of con-crete. d Test also indicates that the waste marble powder can be successively utilized as partial replacement of fine aggre-gate in concrete production. e As marble powder easily contaminates air and water and
replaced marble powder with cement or sand in mass basis, separately. They concluded that 10 replacement was found to be an optimal value since it provided similar workability and strength properties to control cement mortar. Erg n 2011, worked on the usability of diatomite and waste marble powder as a partial replacement of cement in
concrete replaced with marble powder as partial replacement of cement. The work is carried out with M20 and M30 grade concrete with wc ratio of 0.55 and 0.45 respectively as a control specimen and the cement is replaced by marble powder in the
the possibility of using marble powder in self-placing concrete as a partial replacement for cement, the results of this study showed that the optimal percentage of replacement is around 50 which leads to an increase in compressive strength . 5-6 studies the effect of the use of marble powder as a partial replacement of cement on the ...
characteristics of concrete using marble dust powder as a partial replacement of cement. T h e Dissertation work is carried out with M 30 grade concrete for which the marble powder is replaced by 0, 5, 10, 15, 20 by weight of cement. For all the mixes compressive, flexural and split tensile
This study aims to evaluate concrete having Waste Marble Powder WMP as partial replacement of cement. Marble is the metamorphic form of limestone CaCO 3 and WMP was chosen as substitute of cement on account of its high calcium oxide content.WMP is by-product of marble industry and is an environmental burden.
Dec 31, 2018 The growing interest for concrete mainly focus on achieving higher strength and durability using various types of materials viz., waste materials, admixtures, plasticisers, etc. In this study, marble powder and exfoliated vermiculite are used as a partial replacement material for cement and fine aggregate, respectively.
The Glass Powder is used as 20 replace by weight of cement and Stone Dust as the partial replacement of Fine Aggregate from 0, 10, 20, 30 and 40. The grade of the concrete here is M-25 and M-30 grade. It has been used as a replacement of fine aggregates in many literature works but this paper presents the feasibility
When marble powder is partially replaced in cement by weight, there is a marked reduction in compressive strength values of mortar mix with increasing marble powder content when compared with control sample at each curing age. No mortar cube with partial replacement of marble granules conform to the standard of IS8112 1989.